Hollow Knight fan-crafts

During the recent steam sale I picked up a bunch of games, and Hollow Knight had been vaguely on my radar since a friend mentioned it, so in it went. I wasn't really prepared for how much I ended up loving this game. The huge and story-drenched world, fluid movement, skill-testing combat, interesting mechanics and choices.. I could go on at length, but it suffices to say that I got really into it! This led to the inevitable outcome of me nerding out over a particular thing: making one or more things about it. 

A bleached shirt has become my obvious first step. I found this poster while looking around for source images, and really loved how it feels like the old 80's movie posters with all the characters montage'd together (e.g. the Star Wars films have stuck with this throughout the years). What I didn't consider was how much higher the level of detail was compared to previous shirts I've made, even after simplifying the design a bit, it had more than 150 "islands" that needed to be placed. Rather than the hour or so I normally budget for ironing down the pattern, it took about 8 hours across several evenings to get it right, and several lost pieces had to be re-cut by hand. That said, I'm super happy with how the final result looks!

Pattern as-ironed
Pattern as-ironed
Bleached result!
Bleached result!

My partner, watching (and hearing) me play just so many hours of Hollow Knight, decided to give it a try. After making it through the first chunk of the game, she was hooked too, and wanted to craft something. One of her fortes is sculpture, so we dug out the polymer clay and got to work! I took a shot at the Wanderer (the player character), which came out reasonably well, but the Hornet she made looks amazing.

Hollow knight clay friends!
Hollow knight clay friends!

Big update: More boxes, more shirts, and beer!

It's been a good while since I've set aside time to scratch out an update, but not for lack of activity. Rather than split all the projects across several posts, I'm opting for one big one! On the woodworking side, I pulled two boxes together: one to house the awkwardly large Planechase planes, and a tea-box as a mother's day gift.
 
While planning out the Planechase box, I stuck to the philosophy that each new project needs to have at least one element I haven't wrestled with before. This time: hinges, felt lining, and one-piece box construction! For materials I went with a plank of bubinga that I picked up a few weeks ago, with curly maple and blue paua shell for the inlays. The lid and bottom were attached with rabbets and the corners 45-degree mitered. A small riser was added to the dice-holding compartment to make it easier to get at them.

 

Just after sawing the lid off
Just after sawing the lid off
Chaos symbol in curly maple inlay
Chaos symbol in curly maple inlay
The planeswalker symbol in curly maple inlay
The planeswalker symbol in curly maple inlay
Loaded with all the sleeved planes and dice!
Loaded with all the sleeved planes and dice!
Planechase anthology symbol inlaid in blue paua shell
Planechase anthology symbol inlaid in blue paua shell
It was my sister's idea to whip up something together for mother's day, and we hit upon the idea of a tea box. She provided the graphics for the lid, helped select materials, and provided plenty of encouragement. Ribbon sapele and bird's-eye maple were picked for the box and top/bottom respectively. For the joinery I decided to make it as fancy as possible, and ended up building a dead-simple box-joint jig for the table saw. After a few tests, I was able to make nice tight-fitting box joints in the fancy wood! The patterns were laser'd on, and a small inlay of niove was glued in. 
 

 

The finger joint jig ready to go
The finger joint jig ready to go
Practice joints looking almost right
Practice joints looking almost right
First attempt at a magnetic closure
First attempt at a magnetic closure
Ribbon sapele showing off the finger joints
Ribbon sapele showing off the finger joints
Lid with noive inlay
Lid with noive inlay
While digging through my closet I came across an early attempt at a megaman shirt and decided that it'd make a good target for a re-do. I hunted down a suitable graphic and went through what, at this point, is a tried and true process. I'm much happier with the result!
Megaman shirt
Megaman shirt
 
Lastly, I got bit by the home-brew bug a week or two ago! I dug out and inventoried my equipment, and picked up an ingredient kit at the local brew shop. When thinking about the trajectory, I realized I don't really have a group of thirsty grad-student friends to conscript for bottling day any more, so I took the next logical step: a kegging setup! 
 
Fridge keg!
Fridge keg!

 

With that set up, current dispensing sparkling water, we got started on the brewing. A scotch ale was the order of the month. The brewing was briefly put on hold while the fittings on our new kettle got a few wraps of plumbers tape, but after that there were no issues during the boiling, cooling, or moving it to the sanitized carboy. A couple days after pitching the yeast, some drama struck! 
Post-geyser solution
Post-geyser solution
 
The fermentation was a bit over-zealous! We quickly ran out for some 1/2" tubing, and fitted it as a blow-off tube, the far end submerged in dilute sanitizer. By the next evening it was done pushing out krausen, and has settled into a slow and study bubbling. In retrospect, a fairly surgery brew in a smaller-sized carboy; I should've expected this and fitted the tube right off the bat, but learning is fine too.  Bottling went smoothly, with half going into about 20 bottles, the rest going into the keg.
20 bottles of tasty scotch ale
20 bottles of tasty scotch ale!